verified Professional protection system

Application technology:
the pro guide

RubberPaint Universal ist eine hochelastische, wasserdichte Schutzbarriere für extreme Beanspruchung. Kalt aufgetragen, ohne Erhitzen, in jedem RAL-Farbton.

01 / Applications

Use cases

Universal liquid rubber bonds without primer to most substrates and adapts to thermal movements of the structure.

roofing

Flat roofs

Bitumen refurbishment or new waterproofing — application without open flame for maximum safety.

foundation

Basement walls

Protective coating against soil damp and diffuse seepage water. Against pressurised groundwater an additional primary waterproofing is required.

balcony

Balconies and terraces

Direct walk-on or under tiles. UV- and frost-resistant.

apartment

Facades and plinths

Breathable, waterproof protection with crack bridging. Ideal for exposed areas.

precision_manufacturing

Metall und Blech

Corrosion protection directly over rust. Two coats for a lasting barrier against oxidation.

forest

Holzkonstruktionen

Elastic coating that doesn't peel like classic glaze. Follows the natural movement of the wood.

deck

Concrete (exterior)

Protects against carbonation and freeze-thaw spalling. Vapour-permeable, CO₂-blocking — for exposed concrete and plinths.

pool

Pool & Schwimmbecken

Coating suitable with standard pool water care for concrete pools as a protective layer over existing waterproofing. Smooth surface where algae find no foothold.

shower

Bad & Feuchträume

Wasserdichte, schimmelhemmende Innenbeschichtung für Badezimmer, Wäscheräume und Kellerräume. Diffusionsoffen, Klasse 1 abwaschbar.

02 / Anwendung

Step-by-step guide

Step 01 / 05

Prepare the substrate

The foundation of long life.

Reinigen Sie die Oberfläche von Staub, Fett und losen Partikeln. Verwenden Sie Hochdruckreiniger oder Drahtbürste. Risse größer als 3 mm vorab mit Dichtmasse spachteln.

Step 02 / 05

Anschlüsse abdichten

Kritische Punkte unter Kontrolle.

Bei Dächern, Balkonen und Terrassen alle Übergänge, Ecken und Details (z. B. Kamine, Dachabläufe) mit Armierungsgewebe in die frische erste Schicht einbetten.

Step 03 / 05

First coat

Schaffung der Grundbarriere.

Apply with brush, lambswool roller or airless sprayer (15–18 MPa, nozzle 0.017"–0.023"). Consumption approx. 100–200 g/m² per coat, depending on substrate porosity.

Step 04 / 05

Drying and curing

Geduld für perfektes Ergebnis.

The first coat is dust-dry after approx. 2 hours at 23 °C / 50 % RH. Apply the next coat only after the previous one is fully dry — otherwise bubbles form.

Step 05 / 05

Second coat

The final armour.

Apply undiluted for full protective thickness. Rain-resistant after 24 h (manufacturer specification), carefully walkable after 24 h, fully load-bearing after 28 days.

lightbulb

Pro tip

Bei stark belasteten Details (Kamine, Wartungswege, häufig betretene Bereiche) empfehlen wir eine dritte Schicht — verlängert die Lebensdauer um Jahre.

03 / Spezifikationen

Technical data

Consumption per coat 100–200 g/m² (0.1–0.2 kg/m²)

Recommended coats 2 (3 for heavily-stressed surfaces)

Drying time 2 h dust-dry · 4 h recoatable

Full cure 28 days

Application temperature +10 °C to +30 °C

Service temperature −20 °C to +50 °C

Binder Acrylic latex (solvent-free)

Tool cleaning Water, immediately after application

04 / Planung

Material requirement

For the standard 2-coat application at approx. 0.3 kg/m² you need the following quantities:

Carport / kleines Flachdach (20 m²)→ ca. 6 kg

Mittleres Flachdach (60 m²)→ ca. 18 kg

Großes Dach / Fassade (100 m²)→ ca. 30 kg

Balcony (10 m²)→ ca. 3,5 kg

We recommend a 10 % reserve for complex details and offcuts. The 6 kg packs are optimal for small areas — for medium and large areas it pays off to order several packs at once.

Got a technical question?

Unser Technik-Team berät Sie zu komplexen Anwendungen, Untergrund-Analyse und Schichtdicken-Berechnung.

Contact support FAQ ansehen